| Projector type | Native 4K 3-chip DLP digital projector up to 120 Hz |
|---|---|
| Technology | 1.38" DMD™ x3 |
| Resolution | 4,096 x 2,160 |
| Brightness |
Up to 56,000 center lumens using HC lenses / Up to 60,000 center lumens using HB lenses 59,200 ansi lumen 66,600 ISO lumen |
| Native contrast ratio | 2,800:1 (typical using HC lenses) / 500:1 ANSI contrast (typical) | 2,000:1 (typical using HB lenses) / 450:1 ANSI contrast (typical) |
| Prime lenses | HC: 1.13-1.72; 1.35-1.86; 1.46-2.10; 1.65-2.60; 2.00-3.35 / HB : XLD 0.8; 1:0 ; 1.45-1.8; 1.8-2.4; 2.2-3.0; 2.8-5.5; 5.5-8.5 |
| Optical lens shift |
Vertical up to +/-100%, depending on lens Horizontal up to +/- 32%, depending on lens Motorized zoom and focus with memory Motorized lens shift with memory |
| Light source | Direct coupled RGB lasers 6P |
| Light source lifetime | 20.000 hours* |
| Color correction | P7 |
| Optical dowser | Standard |
| Orientation | Tilt 45° up and 30° downwards | Rotation – 20 degrees / +90 degrees (=Portrait) |
| Sealed DLP™ core | Standard |
| Inputs | Slot 1 :Dual HDBt; HDMI 2.0 (HDCP 2.2); DP 1.2 (HDCP 1.3); Quad 3G/12G SDI / BarcoLink | Slot 2: Quad DP1.2 |
| Input resolutions |
From NTSC up to 4K (4,096 x 2,160) 120 Hz refresh rates: 24hz to 120hz 4K/4KUHD (4096 x 2160/ 3860 x 2160) |
| Picture-in-picture | Two sources simultaneously |
| CLO (constant light output) | Standard |
| ScenergiX | Horizontal and vertical edge blending |
| Image processing | Embedded warp & blend engine |
| Keystone correction | Yes |
| Integrated web server | Yes |
| Software tools | Projector Toolset |
| Control | XLR wired + IR, RS232, Wifi (opt), GSM (opt) |
| Network connection | 10/100 base-T, RJ-45 connection, Wifi (optional) |
| Dimensions (WxLxH) | Projector: 744 x 1,445 x 706 mm / 29.3 x 56.9 x 27.8 inches (with feet, no lens) | Two chillers, each with the following dimensions: 701 x 701 x 800 mm / 27.6 x 27.6 x 31.5 inches |
| Weight | Projector: 235kg (~520lb) / Chillers: ~115kg (~250lb) per chiller (two chillers needed) |
| Cooling liquid hose length | 2.5-5-10m (8.2-16.4-32.8ft) |
| Power requirements |
Projector: 200-240/346-415V 50-60Hz 16A 3W+N+PE (Y connection) / Power cord size range: 4 sq mm to 6 sq mm, 10AWG to 8AWG /Circuit breaker range: 25A to 40A | 200-240V 3W+PE 28A 50-60Hz (/\- connection) / Power cord size: 6 sq mm, 8AWG / Circuit breaker: 40A Chillers: 230/400V 3W+N+PE 16A, 2.5 sq mm (Y connection) or 208V / 3W+PE (/\- connection) / Max. 16A per phase |
| Ambient temperature | 10-35°C (95°F) Max. (projector and chillers) |
| Operational humidity | 5-80% (non condens) |
| Power consumption |
Projector @ full laser power: 6.7 kW (2D or Polarization 3D) / 3.6 kW (Barco Laser3D - 6P) Chillers @ full laser power: 3.0 kW (2D or Polarization 3D) / 2.5 kW (Barco Laser3D - 6P) |
| 3D systems | Color3D (Barco Laser3D): Native 6-primary color-3D system. Only requires color filter glasses / Active glasses systems / Polarization recuperation systems |
| Safety class | Class 1, RG3 |
| Certifications | CE; ETL/UL/FCC |
| *Note | *Less than 20% decrease during a runtime of 20,000 hrs |
XDL-4K60產生不小于60000流明的亮度，色彩表現非凡。屏幕更大，像素更高，效果更佳。此外，還具備令人難以置信的RGB激光性能，信號靈活性達到舒適的120 Hz，并且無需校準。
以圖像質量說話
采用高達120Hz的固有4K分辨率，實現突破性的圖像深度，為游客提供更清晰、更真實的對比度，實現更大的影響力。當你需要時，可以使用高達60K流明的亮度。
節省成本的設計
想要降低每流明的成本？那就選擇XDL。RGB激光光源可以降低圖像閃爍和燈泡相關的成本和維護（例如燈泡更換）。與氙氣投影機相比，XDL的功耗降低了40％，而且您還可以重新使用現有的巴可XLD +鏡頭。出色的可靠性，預計使用壽命至少可達20000小時。
設置和使用簡單
安裝一臺投影機始終比安裝多臺投影機容易。這意味著運輸和設置的設備更少 ，可能出現的故障點也會更少。XDL通過縮短校準時間來加快安裝。投影機提供高達100％的卓越鏡頭轉換，因此您可以隨時將其安裝在任何需要的地方。還可以使用機載實時變形和融合輕松地將圖像與投影表面相匹配。
出眾的3D效果
通過使用雙波長的分色和更有效的光線使用，可獲得絕對更佳效果的卓越3D性能。完全不會出現重影的問題。投影機投影到白色幕布而不是銀幕上。
